cirno (touhou) drawn by hidariyori

Completely stumped by てん実物 (実物 I can figure by itself, but the hiragana てん could completely throw off the meaning, depending on which kanji it's supposed to represent) and the usage of 単孔 (which normally means "monotreme", as in platypuses) in relation to the M4.

0 Reply

Wergild

almost 14 years ago

[hidden]

I found a packet which uses てん実物 in reference to comp A, comp B, TNT, and CW3-- so I can only assume it's something like "(explosive) filling," but I'm not positive, as I could only find a single pdf that had some vague tables...

As for 単孔, I originally thought it meant "single socket" as in single socket screws, but I have no idea how the number of screws could answer any of the listed questions, and I can't tie the word to explosives either.

0 Reply

Target moving from right to left at 24 km/h, at a range of 150 yd.

Total length

Temperature limit

Explosive Mixture D

Weight

Fuse

Combustion time

Minimum temperature

Maximum temperature

Filling The word "填実"(Tenjitsu) means same as "充填." See this "Answers" site of Yahoo! Japan.(Japanese)

Which one of the following is not an ammunition type for the 89mm rocket? (⑨ points)

Which one of the following is the correct range of the rear danger zone (A Zone)? (⑨ points)

At a range of 200 m, what is the proper targeting point for a traversing target, provided the sighting device is an M35A1's focusing mirror? (⑨ points)

Illustrate the aiming procedure for each of the targets shown below, provided the sighting device is an M28A2's focusing mirror. (⑨ points)

In the case of a misfire, the shooter must slowly release the trigger while maintaining aim. Explain why. (⑨ points)

1. Yellow phosphorus smoke bombs 2. Practice rounds 3. Dummy rounds 4. Anti-personnel high-explosive rounds 5. HEAT rounds

Bonus

Try to work these out.
Cirno

1. The front end of the target's turret 2. The rear end of the target 3. Just forward of the center of the target's turret 4. The front end of the target 5. The center of the target's turret 6. Just forward of the center of the target 7. The rear end of the target's turret 8. The center of the target 9. Just rearward of the center of the target's turret 10. Just rearward of the center of the target

Select the correct performance specifications for an M35A1 rocket HEAT round from the data listed below. (⑨ points)

Propellant

Target approaching head-on at 8 km/h, at a range of 200 yd.

※Cut and paste, okay?☆

Maximum range

Minimum temperature

Target retreating straight away at 16 km/h, at a range of 200 yd.

Target approaching at 16 km/h at an angle of 50˚ from the right, at a range of 200 yd.

Maximum temperature